Tech Data

Note: Download Zone is in the left-hand column

Deck Jak®

Colour: Black

Base Diameter: 105mm

Minimum Height: 65mm * This is able to be cut down by arrangement; minimum height 25mm. (These can be cut shorter on site as necessary)

Maximum Height (Deck Jak® only): 105mm 

Maximum Height (Deck Jak® and Deck Jak® Spacers): 400mm +

Fin Width: 3mm - Narrow Fin

Fin Width: 8mm - Wide Fin (For use with Tile-on-Compressed-Sheet only)

Deck Jak® Spacer Diameter: 110mm

Deck Jak® Spacer Height: 20mm & 50mm Spacer (Combinations of these are able to be stacked under the Deck Jak® tile support to achieve the desired height)

• 200mm diameter base can be placed under the Deck Jak® tile support or the Deck Jak® Spacer

Wall spacers: There are 3 basic types (more) that 'lock' the walking surface in place. They also allow a 6mm drainage gap, without becoming a trip or 'high heel' hazard, especially at doorways

Maximum Fall under the Deck Jak® System (to allow a level pedestrian surface):

The Deck Jak® will achieve 1:30 = approx 33mm/m = 2° by means of the deliberate tolerance, which allows the top to pivot within the base. This becomes immobile once the deck is laid (as lateral movement is nullified due to full encapsulation of the pedestrian surface).

• 200mm diameter base has an inbuilt fall that will double the fall compensation to 4°.

Load Testing Maximum Weights:

• Fins: 1055kg
• Screw Thread: 3298kg
• 330 x 330 ceramic tile on 18mm compressed sheet: 867kg
• Chair leg on corner of ceramic tile on 18mm compressed sheet: 511kg shear
• 300 x 300 concrete paver (green): 596kg
• Chair Leg on 300 x 300 paver (green): 410kg

Architects / Designers:

Please contact us for the .dwg file or download from our ProductSpec listing here.

 Reo Pegs

Material: Polypropylene

Colour: White

Total Length: 450mm

Length of embedment: 150mm

Exposed length [concreted length]: 300mm

Distance from Top of peg to lowest point of top hook: 85mm

Distance between hooks: 125mm